LED LIGHTING INSTALLTION

EPS recently completed work to replace LED ATEX light fittings installed within an explosive environment. The project involved lighting design, supply and installation of over 200 light fittings and several junction boxes. The project will contribute to saving energy costs and costs associated with replacing old fluorescent light tubes.

Marine Switchboard Replacement Project

EPS has been awarded a contract to replace four 440V switchboards for an Oil&Gas vessel (FPSO) located in the UK Continental Shelf (UKSCS). Offering the complete Engineering Procurement Construction (EPC) solution EPS has been requested to undertake the Front End Engineering Design (FEED), detailed design, project management, planning, supply and construction.…

33 kV Subsea Power Re-configuration Project

Two of the three platforms generated power for to supply all three platforms. Marathon Oil proposed to decommission one of the platforms which operated with three Gas Turbine Generators and the remaining generating platform supporting the non generating platform. The power management system that manages the power flow between all three…

Electrical Protection Optimisation Study

EPS has recently completed an electrical protection co-ordination study using power system modelling software for one of our bulk chemical transportation clients. The study reported several areas of concern and addressed where the protection could be improved to prevent future outages out at sea.

Oil&Gas FPSO Subsea Tie Back Project

EPS was requested to provide a power system study for HV power and increased LV load to accommodate increased oil production rates for a vessel located offshore. The existing Gas Turbine Generators (GTG’s) are to be upgraded to accommodate this. This is to allow 3 out of 4 GTGs to operate…

Electrical, Control & Instrumentation Design

A Teesside based chemical bulk storage company requested EPS to provide Engineering & Design EC&I services for a new compressed gas storage facility. This consisted of a new Motor Control Centre (MCC), hazardous area lighting, compressor motors, pumps, PLC panel and instrumentation to monitor and control the new facility.

Oil&Gas Dive Support Vessel

EPS has recently completed an electrical protection co-ordination study using ETAP power system modelling software for one of our clients supporting the North Sea Oil&Gas industry. The study reported several areas of concern and addressed where the protection could be improved to prevent future outages out at sea.

Oil& Gas Diving Vessel

EPS recently completed an Arc Flash Energy study for another offshore dive support vessel comprising of offshore surveys, ETAP power system model development and an arc flash energy mitigation report. The report detailed what measures should be put in place to make the electrical distribution system safe and put in place…

Biomass Gas Plant

EPS was awarded a contract to provide power quality analyser services for several biomass plants located around the UK. All too often we are finding poor quality electrical design and installations where catastrophic failures have occurred due to inadequate engineering. The power study determined what caused the failures and recommended the…